Magnetic board

Transform Any Surface into a Whiteboard with SketchPaint

Reimagine walls, doors, cabinets, or even old chalkboards as an elegant writing system that promotes organization, visualization, and creativity. SketchPaint creates a smooth whiteboard surface for marker use, while MagnetPaint lets you attach magnets to the same area. Combining both products unlocks endless possibilities for home, office, or classroom environments.

Key Benefits

Surface Preparation

Before application, ensure the substrate is solid, clean, and completely dry. Remove glossy coatings and any loose or flaky paint layers. For dark or highly absorbent surfaces, apply a suitable white primer to reduce SketchPaint usage:

  • Surfaces must be smooth; sand and wipe with a dry cloth as needed

  • Free of grease stains and dust

  • Suitable for stone, wood, hard plastic, and metal

SurfaceRecommended Pre-treatment
StoneSanding; Wipe with cloth
WoodSanding; Degreasing
PlasticLight sanding; Use primer
MetalRust removal; Color primer

Application Instructions

  1. Inspect and clean the surface to remove dust and irregularities.

  2. Pour the hardener from can A into can B, then stir thoroughly.

  3. Let the mixture rest for 5 minutes to eliminate air bubbles; add up to 3% clean water if needed.

  4. Use a short-pile fluffy roller or very fine foam roller to apply a generous, thick coat.

  5. Remove painter’s tape within one hour of application and clean tools with water and soap.

Theoretical coverage is up to 3 m² per 0.5 L. The surface is tack-free after approximately 4 hours and fully writable after 3 days. For best results, clean regularly with whiteboard cleaner.

Our best offer

Scroll to Top